You should spend about 20 minutes on Questions 14-26 which are based on Reading Passage 2 below. 

Intelligence and Giftedness

A 

{[In 1904 the French minister of education, facing limited resources for schooling, sought a way to separate the unable from the merely lazy. Alfred Binet got the job of devising selection principles and his brilliant solution put a stamp on the study of intelligence and was the forerunner of intelligence tests still used today, he developed a thirty-problem test in 1905, which tapped several abilities related to intellect, such as judgment and reasoning, the test determined a given child’s mental age’. The test previously established a norm for children of a given physical age. (for example, five-year-old on average get ten items correct), therefore, a child with a mental age of five should score 10, which would mean that he or she was functioning pretty much as others of that age. The child’s mental age was then compared to his physical age.{[.18

B

A large disparity in the wrong direction (e.g., a child of nine with a mental age of four) might suggest inability rather than laziness and mean he or she was earmarked for special schooling, Binet, however, denied that the test was measuring intelligence, its purpose was simply diagnostic, for selection only.. This message was however lost and caused many problems and misunderstanding later.

C

Although Binet’s test was popular, it was a bit inconvenient to deal with a variety of physical and mental ages. So in 1912, Wilhelm Stern suggested simplifying this by reducing the two to a single number, he divided the mental age by the physical age and multiplied the result by 100.. An average child, irrespective of age, would score 100. A number much lower than 100 would suggest the need for help, and one much higher would suggest a child well ahead of his peer.

D

This measurement is what is now termed the IQ (for intelligence quotient) score and it has evolved to be used to show how a person, adult or child, performed in relation to others. (the term IQ was coined by Lewis M. Terman, professor of psychology and education of Stanford University, in 1916. He had constructed an enormously influential revision of Binet’s test, called the Stanford-Binet test, versions of which are still given extensively.)

E

The field studying intelligence and developing tests eventually coalesced into a sub-field of psychology called psychometrics (psycho for ‘mind’ and metrics for ‘measurements’). The practical side of psychometrics (the development and use of tests) became widespread quite early, by 1917, when Einstein published his grand theory of relativity, mass-scale testing was already in use. Germany’s unrestricted submarine warfare (which led to the sinking of the Lusitania in 1915) provoked the United States to finally enter the First World War in the same year. The military had to build up an army very quickly; it had two million inductees to sort out. Who would become officers and who enlisted men? Psychometricians developed two intelligence tests that help sort all these people out, at least to some extent, this was the first major use of testing to decide who lived and who died, as officers were a lot safer on the battlefield, the tests themselves were given under horrendously bad conditions, and the examiners seemed to lack commonsense, a lot of recruits simply had no idea what to do and in several sessions most inductees scored zero! The examiners also came up with the quite astounding conclusion from the testing that the average American adult’s intelligence was equal to that of a thirteen-year-old!

F

Intelligence testing enforced political and social prejudice, their results were used to argue that Jews ought to be kept out of the united states because they were so intelligently inferior that they would pollute the racial mix, and blacks ought not to be allowed to breed at all. And so abuse and test bias controversies continued to plaque psychometrics.

G

Measurement is fundamental to science and technology, science often advances in leaps and bounds when measurement devices improve, psychometrics has long tried to develop ways to gauge psychological qualities such as intelligence and more specific abilities, anxiety, extroversion, emotional stability, compatibility, with a marriage partner, and so on. Their scores are often given enormous weight, a single IQ measurement can take on a life of its own if teachers and parents see it as definitive, it became a major issue in the 70s, when court cases were launched to stop anyone from making important decisions based on IQ test scores, the main criticism was and still is that current tests don’t really measure intelligence, whether intelligence can be measured at all is still controversial, some say it cannot others say that IQ tests are psychology’s greatest accomplishments.. 

You should spend about 20 minutes on Questions 27-40 which are based on Reading Passage 3 below.

Making of Olympic Torch

A

Every two years, people around the world wait in anticipation as a torch-bearing runner enters the Olympic arena and lights the cauldron. The symbolic lighting of the Olympic flame marks the beginning of another historic Olympic Games. The opening ceremony is the end of a long journey for the Olympic torch. The ancient Greeks revered the power of fire. In Greek mythology, the god Prometheus stole fire from Zeus and gave it to humans. The Greeks held their first Olympic Games in 776 B.C. The Games, held every four years at Olympia, honored Zeus and other Greek gods. A constantly burning flame was a regular fixture throughout Greece. At the start of the Olympic Games, the Greeks would ignite a cauldron of flame upon the altar dedicated to Hera, goddess of birth and marriage.

B

The flame was reintroduced to the Olympics at the 1928 Amsterdam Games. A cauldron was lit, but there was no torch relay. The first Olympic torch relay was at the 1936 Berlin Summer Games and it was not introduced to the Winter Olympics until the 1952 Games. It was lit that year not in Olympia, Greece, but in Norway, which was chosen because it was the birthplace of skiing. But since the 1964 Olympics at Innsbruck, Austria, every Olympic Games – Winter and Summer – has begun with a torch-lighting ceremony in Olympia, Greece, followed by a torch relay to the Olympic stadium.

Designing an Olympic Torch

C

The torch starts out as an idea in the mind of a designer or group of designers. Several design teams submit proposals to the Olympic Committee for the opportunity to create and build the torch. The team that wins the assignment will design a torch that is both aesthetically pleasing and functional. A torch can take a year or two to design and build. And once the torch has been built, it must be tested rigorously in all kinds of weather conditions. The look of the modern Olympic torch originated with John Hench, a Disney artist who designed the torch for the 1960 Winter Olympics in Squaw Valley, California. His design provided the basis for all future torches. Since then, designers have tried to create a torch that represents the host country and the theme for that Olympic Games.

D

The torch must then be replicated … and replicated. It’s not just one torch making the journey to the Olympic stadium; it’s thousands. Anywhere from 10,000 to 15,000 torches are constructed to accommodate the thousands of runners who carry them through each leg of the Olympic relay. Each runner has the opportunity to purchase his torch at the end of his leg of the relay.

Olympic Torch fuel

E

The first torch used in the modern Olympics (the 1936 Berlin Games) was made of a thin steel rod topped with a circular piece from which the flame rose. It was inscribed with a dedication to the runners. The torch must stay lit for the entire length of its journey. It must survive wind, rain, sleet, snow, and a variety of climates (desert, mountain, and ocean). For fuel, early torches burned everything from gunpowder to olive oil. Some torches used a mixture of hexamine (a mixture of formaldehyde and ammonia) and naphthalene (the hydrogen- and carbon-based substance in mothballs) with an igniting liquid. These substances weren’t always the most efficient fuel sources, and they were sometimes dangerous. In the 1956 Games, the final torch in the relay was lit by magnesium and aluminum, burning chunks of which fell from the torch and seared the runner’s arms. The first liquid fuels were introduced at the 1972 Munich Games. Torches since that time have carried liquid fuels – they are stored under pressure as a liquid but burn as a gas to produce a flame. Liquid fuel is safe for the runner and can be stored in a lightweight canister. The torch designed for the 1996 Atlanta Summer Olympics has an aluminum base that houses a small fuel tank. As fuel rises through the handle, it is pushed through a brass valve with thousands of tiny openings. As the fuel squeezes through the small openings, it builds pressure. Once it makes it through the openings, the pressure drops, and the liquid fuel turns into gas for burning. The tiny holes maintain a high pressure in the fuel to keep the flame going through harsh conditions.

F

The 1996 torch was fueled by propylene, which produced a bright flame. But because propylene contains a high level of carbon, it also produced a lot of smoke – not a plus for the environment. In 2000, the creators of the Sydney Olympic torch came up with a more lightweight, inexpensive, and environmentally friendly design. To fuel their torch, they decided on a mixture of 35 percent propane (the gas used to heat home stoves and barbecue grills) and 65 percent butane (cigarette lighter fuel), which ignites a strong flame without making a lot of smoke. Because the propane/butane mixture can be stored as a liquid under relatively light pressure, it can be kept in a lightweight container. It then burns as a gas under normal atmospheric pressure. The liquid fuel is stored in an aluminum canister located about halfway up the torch. If flows up to the top of the torch through a pipe. Before leaving the pipe, the liquid fuel is forced through a tiny hole. Once it moves through the hole, there is a pressure drop, causing the liquid to turn into gas for burning. The torch moves the liquid fuel at a consistent rate to the burner, so the flame always burns with the same intensity. The torch can stay lit for about 15 minutes.

G

The engineers behind both the 1996 and 2000 torches adopted a burner system that utilized a double flame, helping them to stay lit even in erratic winds. The external flame burns slowly and at a lower temperature than the internal flame. This flame is big and bright orange, so it can be seen clearly, but it is unstable in winds. The interior flame burns hotter, producing a blue flame that is small but very stable because its internal location protects it from the wind. It would act like a pilot light, able to relight the external flame should it go out.

H

When the 2002 Olympic Torch, in Salt lake city, the top section was glass, and the Olympic Flame burned within the glass, echoing the 2002 Olympic theme Light the Fire Within. The glass stood for purity, winter, ice, and nature. Also inside the glass was a geometric copper structure which helped hold the flame. The two silver sections also mirrored the blue/ purple colors of the Fire and Ice theme.